StarNet Communications, Santa Clara, California USA. Alps Printer MD-1300/1000 Driver Download. Alps Printer MD-1300/1000 Driver for Mac OS. Note - when using the Mozilla Firefox browser you may experience problems while downloading the file, we recommend using Microsoft Internet Explorer or Opera browsers.
Public and Factory software images can be updated from the Embedded portal (HTTP or USB update methods) to the Factory software image only. To update STB to Public image (provided in Releases at soft.infomir.com) it is necessary to use Bootloader menu Upgrade Tools (USB Bootstrap, MC Upgrade, and so on). Updating STB to custom/other software images (that differs from the factory one) is performed in the Embedded portal (HTTP, USB) or in the MiddleWare menu. The following instructions should be taken into account:
Software versions of STB are released to STB basic models (250, 254, 270). Last releases location:
where: <model> - mag250, mag254 or mag270 <release> - version of release.
Update from Embedded portal by HTTP
Drivers Starnet Modems Compatible
There are two options on how to update STB software from the manufacturer's web-server (by HTTP) using the commands of Embedded portal menus:
Update from Settings menu;
Update from System Settings menu.
When STB runs with the standard software image (Factory image), the software will be updated to the last stable version of the Factory image located on the manufacturer's server.
Update from Settings menu
Open Settings menu of Embedded portal;
Choose Software autoupdate;
In the opened window choose Update manually (F2 on RC).
In the opened Software autoupdatewindow, choose the list of New versions by pressing OK - The latest available version is on top of the list;
Select the required software version;
Choose Update (F1);
Wait until STB will be updated. The status of the software update is displayed by the progress bar and comments. STB will be rebooted automatically after the update.
Update from System Settings menu
Go to Settings ⇒System settings (or press Setup, Services, or Set on the RC - depending on RC type);
Open Sofware update.
Set Update method = HTTP.
Push Verify (ОК). If the test is successful you'll see information about the availability of new versions of the software.
Push Update (F1) - to begin the update. The status of the software update is displayed by the progress bar and comments.
At the end of software downloading STB will automatically reboot.
The following updating address is set in Factory image (<model> - basic model number : 250, 254, 270):
Note! The string is available for editing via the virtual keyboard (brought up by KB key on RC) or USB keyboard.
Update with USB drive
STB software can be updated using USB-drive. The required software version should be pre-downloaded and written to the USB-drive.
USB-drive requirements
The USB drive must have a FAT32 file system format. If there are more than one partitions on the USB drive use the first one.
In case of an update from the Bootloader, if your STB has more than one USB socket, a rear socket is used for the upgrade.
Create directorymag<model> (<model> - basic model number: 250, 254 or 270) in a root directory of the USB-drive.
Update from System settings menu
Updating from the System Settings menu of the Embedded portal allows updating STB software to the factory image. Note! File bootstrap is not used.
On PC (preparation the USB-drive)
Download the imageupdate file from manufacture's server: http://update.infomir.com/mag/<model>/imageupdate. For example, for MAG254: http://update.infomir.com/mag/254/imageupdate
Put the imageupdate file in the USB-drive directory mag<model>. For example, for MAG254:
On STB
Connect prepared USB-drive to STB socket.
Open System settings⇒Software update.
In the window Software update set Update method = USB. You can see two new strings:
Disk - name of USB-drive;
Path - Path to update file on the USB-drive.
Select Verify (OK) to make sure that the STB detects imageupdate file.
If the file has been detected and can be read you'll see Software Update window.
In Software Update window you can see descriptions of the software versions: the Current version (operating in STB) and New version (available on USB drive).
Find out whether you need for updating by comparing Current and New versions.
To reject the update click Cancel in Software Update window.
To begin updating click Update (F1) in Software Update window.
Wait until updating is complete. The status of the software update is displayed by the progress bar and comments.
After software loads, STB will automatically reboot.
Update from Bootloader menu
The Bootloader menu is launched by the user during STB boot. This type of update allows updating STB software to Public image.
Note! File bootstrap should be used. It is located in the STB release.
At PC (preparation of USB-drive)
If you need to upgrade STB to factory image:
Download Bootstrap_<model> file from release of required STB model;
Bootstrap_<model> rename to Bootstrap;
Download imageupdate file from manufacture's server: http://update.infomir.com/mag/<model>/imageupdate
Put imageupdate andBootstrap files in the directory mag<model>
If you need to upgrade STB to public image:
Download imageupdate and Bootstrap_<model> files from release;
Bootstrap_<model> rename to Bootstrap;
Put imageupdate andBootstrap files in the directory mag<model>.
For example, for MAG254:
Drivers Starnet Modems App
On STB
Connect prepared USB-drive to STB socket (if there are two USB-sockets - you must use the rear one).
Enter Bootloader menu;
Select Upgrade Tools, open by pressing Right on RC ;
Select USB Bootstrap and confirm with OK;
Wait for updating finish, STB will be rebooted.
Video example of update with USB-drive from Bootloader menu
