YOUR PARTNER FOR DIGITAL CLINIC, EzSensor Classic Ultra-Slim for Easy Positioning Patient Oriented Design. Trustworthy Image SPECIFICATION Size 1.0 Size 1.5 Size 2.0 Detector CMOS Pixel Size 29.6 μm Theoretical Resolution 17 lp/mm Dynamic Range 12 bit Active Area(WxL) Size 1. Vatech America does not recommend or endorse any cleaning product in particularly. It is the responsibility of the practitioner to determine what is adequate for use to clean and sanitize based on FDA as well as local codes.However based on performance and recommendation by Vatech Users; Clorox Brand. Hydrogen peroxide wipes. We formed VideoDental to help practices all over the nation save money; and that is exactly what we have been doing for the past 26+ years with leading innovation.
Virtual COM Port Drivers for Ross-Tech USB Interfaces
M.2 NVMe PCIe x4 Adapter for Extra Long 110 Module / UGT-M2PC110 Dual M.2 SSD RAID PCIe x4 Host Card / UGT-M2PC300R M.2 NVMe PCIe x4 Low Profile Adapter with 110 Length Support / UGT-M2PC130.
Older Ross-Tech RS-232 Serial interfaces can be set to power up as 'dumb K-Line pass through' interfaces. This allowed those old Serial interfaces to be compatible with a wide variety of third-party applications which expect a 'K-line pass-through' serial interface. However, our USB interfaces present additional challenges. Early in their development, we found a number of technical advantages to using a 'direct' USB driver which bypasses the Windows Serial drivers entirely. Hence the USB drivers that ship with VCDS do not emulate a serial COM port and cannot be used with applications that expect to communicate via a serial port.
NOTE: The following applies to our legacy USB interfaces (HEX-USB, KII-USB and HEX-USB+CAN). It does NOT apply to our current HEX-V2 or HEX-NET interfaces. These new interfaces do not use a USB UART chip and cannot be be used for 'dumb K-line pass-through'!
Vatech Drivers
Vatech Driver License
In order to facilitate the use of third-party applications which expect to communicate with a serial interface, drivers that emulate a COM port are available. However, anyone thinking about using them needs to be aware of the following points:
We do not offer installation support for these drivers. They should be used only by someone who is competent/comfortable installing (and possible uninstalling) USB drivers on his PC.
We cannot offer any support for third-party software, nor any guarantee that it will work correctly with these drivers. Of course, the same would apply with a serial interface as well.
Va Tech Drive
That said, here some installation notes:
Vatech Support
These drivers are compatible with Windows 2000 and newer. They should work with W2K, XP-32, XP-64, Vista-32 and Vista-64. We do not have any VCP drivers for Windows 98!
Unzip the contents of the download into a new folder.
With an interface plugged in, find it in Device Manager, right-click it, and select Update Driver.
Depending on what drivers your system already has installed, you may have to 'force' these by telling the wizard not to search, but to let you specify what driver to install, then doing the Have Disk and Browse thing.
There's also the possibility that the Virtual COM Port won't install automatically. We've found no real pattern why it does on some systems and not on others. If it does not, find the interface in Device > Manager. The name should show '... with VCP'. Open the properties sheet, click the Advanced tab, and make sure Load VCP is checked. Once checked, disconnect and re-connect the interface.
Once the USB Serial Port is installed, you may need to change the COM Port Number (depending on how high a number the applications supports). Device Manager, Properties sheet for the USB Serial Port, Port Settings tab, Advanced button. The COM Port Number may change if you plug the interface into a different USB port, so I'd recommend always using the same USB port.
VCDS should continue to work fine with these drivers installed. Leave VCDS set to USB, not a Virtual COM Port!
Vatech Driver Support
Assuming you've read and understand all of the above, you can download the 'Virtual COM Port' drivers here:
Vtech Driver Toy
Home
Products
VCDS
Product Information
Interfaces
TWIN-USBKII-USB HEX-USB+CAN
Virtual COM Port Drivers