Yaskawa Electric Port Devices Driver Download For Windows 10

| 21-04-2021
[RAND-1-100] Comments



  1. Yaskawa Electric Port Devices Driver Download For Windows 10 Free
  2. Driver Downloads For Windows 7
  3. Driver Download Nvidia
  1. After the download to your PC is finished, double-click on the file's icon to start the installer program. After the installer starts, follow the instructions given on each screen. After installation, execute GP-Pro EX. After installation, click on the Device/PLC area's YASKAWA Electric Corporation selection and select INVERTER/SERVO SIO.
  2. Device Hardware: Modbus - RS232 Cable - Available serial port Modbus Ethernet - Ethernet Card - Ethernet network with TCP/IP services enabled Modbus Plus - Modicon SA-85 card - Netlib drivers PLC Hardware - If using Modicon PLC with Modbus Ethernet then must also use the NOE module.

For example, when the master chip used in the controller is M-Link provided by Yaskawa, only the Yaskawa products are used for the servo driver and servomotor used for the control target. On the contrary, if the servo driver and the servo motor were manufactured by Yaskawa, only controllers supporting M-Link could be used.

>Inverters >YASKAWA Electric Corporation INVERTER/SERVO SIO Driver

Please acknowledge the following terms of use before you use our download service. Download of any file signifies your agreement to the terms of use.

Terms of Use
  1. Schneider Electric Japan Holdings Ltd. ('SEJH') shall retain all intellectual property rights to the files that SEJH provides for this service.
  2. Who, uses or plans to use SEJH's products, may download and use any file.
  3. Reproduction, disclosure, re-publication, assignment, lease, decompilation, modification, falsification or reuse of any file that SEJH provides for this service shall be prohibited.
    However, for manuals, samples, BMP images and CAD files, you may reprint, duplicate, quote a part of the content or the whole on your company's specification sheets, or instruction manuals for built-in products. Also you may change the layout of the content.
  4. This download service is provided through the Internet. Please acknowledge that SEJH provides no guarantee of the condition at the time of provision, the availability of access and the condition of use concerning this service before you use this service.
  5. Please use this service at your own risk.
  6. If any additional conditions such as service usage conditions are attached to the downloaded files, please comply with such conditions as well.
Notices:
  1. Files are subject to deletion, or modification of the contents or specifications without notice.
  2. Please confirm that the downloading file size completely accords with the download file size shown.
  3. If the file sizes do not match, delete the file without decompressing and then download the same file once again.
Download

Note:

→ Precautions for adding a new driver onto Windows Vista
→ Precautions for adding a new driver at Daylight Saving Time

TitleYASKAWA Electric Corporation INVERTER/SERVO SIO Driver
VersionVer. 1.15.01
File NameYAS_INVS.exe
File Size1,111KB
Applicable SoftwareGP-Pro EX Ver. 2.10.000 or later
Pro-Server EX Ver. 1.30.000 or later
You can check your version by 'Help' function -> 'Version Info' .
Related Devices
  • Varispeed F7 Series
  • VS mini J7 Series
  • Varispeed F7S Series
  • Varispeed AC Series
  • J1000 Series
  • GA700 Series
  • Varispeed G7 Series
  • VS mini V7/VS-606V7 Series
  • Varispeed L7 Series
  • V1000 Series
  • A1000 Series
  • Sigma-V Series
Related Units Required versions depend on models.
Please check 'Supported Models / Version' for the required versions of GP-Pro EX. Required driver versions for different models are listed below.
ModelGP3000 SeriesVer. 1.10.00 or later
ST3000 SeriesVer. 1.10.00 or later
LT3000 SeriesVer. 1.10.00 or later
GP4100 Series (GP4105, GP4106)Ver. 1.11.00 or later
GP4100 Series (GP4104: Ethernet Multilink only)Ver. 1.12.00 or later
GP4100 Series (GP4115, GP4116)Ver. 1.14.01 or later
GP4100 Series (GP4114: Ethernet Multilink only)Ver. 1.14.01 or later
GP4000M SeriesVer. 1.14.01 or later
GP4000 SeriesVer. 1.13.00 or later
LT4000M SeriesVer. 1.14.01 or later
SP5000 SeriesVer. 1.14.01 or later
IPC Series for WinGPVer. 1.10.00 or later
General PCs for WinGPVer. 1.10.00 or later
ManualFor details, please read the following
PDF:yas_invs.pdf ( 3,067KB )
For general information regarding Device connection and documentation conventions, please refer to 'Device/PLC Connection Manual'.
Updated ContentsVer. 1.15.01 (Dec. 21, 2016)
The following setting was added:
  • Support GA700 Series

Installation (This file is self-extracting.)

  1. Please confirm that the supported software is installed in your computer. Prior to installing the driver, close all your personal computer applications, including any resident programs such as virus detection program, etc.
  2. Click on the above file name to download the data to desired folder.
  3. After the download to your PC is finished, double-click on the file's icon to start the installer program.
  4. After the installer starts, follow the instructions given on each screen.
  5. After installation, execute GP-Pro EX.
  6. After installation, click on the Device/PLC area's [YASKAWA Electric Corporation] selection and select [INVERTER/SERVO SIO].
*
When using the driver, be sure to refer to the Device Connection Manual PDF (Shown above). Also, for general information regarding Device connection and documentation conventions please refer to your own Device/PLC Connection Manual.

Update History:

[Ver. 1.15.01] (Dec. 21, 2016)

The following setting was added:
  • Support GA700 Series.

[Ver. 1.14.01] (Jan. 31, 2012)

The following settings were added:
  • Support A1000 Series.
  • Support GP4000M Series.
    * Ver. 2.71.000 or later of GP-Pro EX is necessary to use a GP4000M Series.
The following trouble was corrected:
  • Series name of ”VS mini V7/VS-606V7” was not completely displayed in offline screen.

[Ver. 1.13.00]

The following setting was added:
  • Support GP4000 Series.
    * Ver. 3.00.000 or later of GP-Pro EX is necessary to use a GP4000 Series.
  • Support of USB/SIO RS422/485 cables (GP4000 series only).

[Ver. 1.12.00] (Oct. 28, 2010)

The following setting was added:
  • Support Sigma-V Series.
  • Support GP4104 (Ethernet Multilink).
    * Ver. 2.70.000 or later of GP-Pro EX is necessary to use a GP4104 (Ethernet Multilink).

[Ver. 1.11.00] (May. 17, 2010)

The following setting was added:
  • Support GP4106, GP4107.
    * Ver. 2.60.000 or later of GP-Pro EX is necessary to use GP4106, GP4107.

[Ver. 1.10.00] (Jul. 30, 2008)

New driver.

Last Updated : Dec. 21, 2016
Posted : Jul. 30, 2008

| Return to Top || Back | HOME |
FAQ for use | Protection of Personal Information | Trademark Acknowledgments | About Intellectual Property Rights | Terms of Use
Copyright (C) 2005- Schneider Electric Japan Holdings Ltd. All Rights Reserved.

Nov 2020 Ver. 5.4.48.0
TS2000 series SYS PROG: version V2.340
TS1000 Smart series SYS PROG: version V2.340
TS1000 series SYS PROG: version V2.340
V8 series SYS PROG: version V2.340
V7 series SYS PROG: version V1.930
V6 series SYS PROG: version V1.930
V606e series SYS PROG: version V1.940
TS series: Main menu screen: Improved signal level display for communication parameters

TS / V8 series : KEYENCE UG device memory (buffer memory of expansion unit) supported.
・ KV-3000/5000
・ KV-3000/5000(Ethernet TCP/IP)
・ KV-7000/8000(Ethernet TCP/IP)
・ KV-Nano
・ KV-Nano(Ethernet TCP/IP)

TS / V8 series : PLCs newly supported.
・ KEYENCE KV-8000 (Ethernet TCP/IP) supported.
・ OMRON CP series supported.
・ Siemens LOGO! (Ethernet ISOTCP) supported.
・ FATEK AUTOMATION FACON FBs series (Ethernet) supported.
・ Hitachi Industrial Equipment Systems SJ Series P1(MODBUS RTU) supported.
・ CIMON CP3E supported.
・ General AE-LINK supported.

TS series : PLCs newly supported.
・ Panasonic LP-RF series supported.
・ Panasonic LP-RF series (Ethernet) supported.

May 2020 Ver. 5.4.47.0
TS2000 series SYS PROG: version V2.320
TS1000 Smart series SYS PROG: version V2.320
TS1000 series SYS PROG: version V2.320
V8 series SYS PROG: version V2.320
V7 series SYS PROG: version V1.930
V6 series SYS PROG: version V1.930
V606e series SYS PROG: version V1.940
V-SFT-5: Tag import: Siemens TIA Portal Ver.15.1/16 supported.
V-SFT-5: Parts: Flipping image supported.
V-SFT-5: Font setting: comment feature supported.

TS / V8 series : PLCs newly supported.
・ OMRON EJ1 supported.
・ KEYENCE KV Nano supported.
・ KEYENCE KV Nano (Ethernet TCP/IP) supported.
・ KEYENCE DL-RS1A (SK-1000) supported.
・ CIMON XP supported.
・ Gammaflux G24 (Ethernet TCP/IP) supported.
・ SAIA PCD: The range of supported station number was extended.
・ Modbus slave (TCP/IP): Multiple settings allowed for PLC2 through PLC8.

Yaskawa Electric Port Devices Driver Download For Windows 10
Nov 2019 Ver. 5.4.46.0
TS2000 series SYS PROG: version V2.280
TS1000 Smart series SYS PROG: version V2.280
TS1000 series SYS PROG: version V2.280
V8 series SYS PROG: version V2.280
V7 series SYS PROG: version V1.930
V6 series SYS PROG: version V1.930
V606e series SYS PROG: version V1.940
V-SFT-5: Failure fixed.

TS / V8 series : PLCs newly supported.
・ FATEK AUTOMATION FACON - Rising pulse / falling pulse supported.
・ Panasonic FP Series (RS232C / 422) (Ethernet UDP / IP, TCP / IP) FP0H added.
・ Fuji Electric ALPHA7 (MODBUS RTU) supported.
・ MITSUBISHI ELECTRIC QnH (A) series CPU supported.

Jun 2019 Ver. 5.4.45.0
TS2000 series SYS PROG: version V2.280
TS1000 Smart series SYS PROG: version V2.280
TS1000 series SYS PROG: version V2.280
V8 series SYS PROG: version V2.280
V7 series SYS PROG: version V1.930
V6 series SYS PROG: version V1.930
V606e series SYS PROG: version V1.940

TS / V8 series : PLCs newly supported.
・ OMRON E5CC/E5EC/E5AC/E5DC/E5GC supported.
・ YASKAWA　DX200 (high-speed Ethernet) file control command supported.
・ Modbus slave (TCP/IP) Variable port number supported.
・ NITTOKU ITS-HRW110 connection supported.

TS / V8 series: Calendar display in the new era name 'Reiwa' supported.
V-SFT-5: 3D parts Rotation supported.
V-SFT-5: 'DEL_FILE' macro command supported.

Dec 2018 Ver. 5.4.44.0
TS2000 series SYS PROG: version V2.270
TS1000 Smart series SYS PROG: version V2.270
TS1000 series SYS PROG: version V2.270
V8 series SYS PROG: version V2.270
V7 series SYS PROG: version V1.930
V6 series SYS PROG: version V1.930
V606e series SYS PROG: version V1.940

TS / V8 series : PLCs newly supported.
・ MITSUBISHI ELECTRIC MR-J2S-*CL supported.
・ IDEC MICRO Smart (Ethernet TCP/IP) supported.
・ IDEC MICRO Smart connectable device added.
・ OMRON CJ2 Ethernet connection supported.
・ FUJI SPB (N mode) & FLEX-PC CPU - PLC ladder transfer function supported.

TS / V8 series : Extended specifications
・ IDEC - D register range expanded
・ SAIA - DB register supported

TS / V8 series: Numerals & Character display: Values appears as asterisks on a screen.
V-SFT-5: Edit model selection: TS1000 Smart series added

Aug 2017 Ver. 5.4.43.0
TS2000 series SYS PROG: version V2.240
TS1000 series SYS PROG: version V2.240
V8 series SYS PROG: version V2.220
V7 series SYS PROG: version V1.930
V6 series SYS PROG: version V1.930
V606e series SYS PROG: version V1.940

V8 / TS2000 / TS1000 series : PLCs newly supported.
・ WAGO %MW address range extended.
・ PROFIBUS-DP Individual settings of the Input/Output Byte Counts Setting supported.
・ Siemens S7 PROFIBUS-DP Individual settings of the Input/Output Byte Counts Setting supported.
・ Hitachi HIDIC-S10(OPCN-1) supported.
・ MITSUBISHI ELECTRIC MR-J4-*A supported.
・ Fuji Electric MICREX-SX series SPF supported.
・ Yaskawa Electric DX200(High Speed Ethernet) supported.
・ High-Pressure Gas Industry R-BLT supported.

TS series: VNC server function added.

Feb 2017 Ver. 5.4.42.0
TS2000 series SYS PROG: version V2.210
TS1000 series SYS PROG: version V2.210
V8 series SYS PROG: version V2.210
V7 series SYS PROG: version V1.930
V6 series SYS PROG: version V1.930
V606e series SYS PROG: version V1.940

V8 / TS2000 / TS1000 series : PLCs newly supported.
・ OMRON NJ Series (EtherNet/IP) supported.
・ Yaskawa MP3000 Series supported.
・ KEYENCE KZ/KV series CPU supported.
・ JTEKT TOYOPUC-Nano (Ethernet) supported.
・ RKC REX-F9000 (Standard Protocol) supported.
・ Siemens　S120 (Ethernet ISOTCP) supported.
・ DELTA　DVP-SE （MODBUS ASCII） supported.
・ DELTA　DVP-SE （MODBUS TCP/IP） supported.
・ FESTO　FEC supported.

V8 / TS2000 / TS1000 series : Function extended.
・ Modbus slave (RTU) - Broadcast function supported (station #0).
・ Modbus slave - RS422 (4-wire system) supported(Transmission mode: 2-wire/4-wire is selectable).
・ SAIA　PCD Transmission mode: Data Mode/Parity Mode is selectable.

Windows 10 (32bit/64bit) supported.

TS2060 supported.
Apr 2016 Ver. 5.4.41.0
V8 series SYS PROG: version V2.150
TS series SYS PROG: version V2.150
S806 series SYS PROG: version V2.150
V7 series SYS PROG: version V1.930
V6 series SYS PROG: version V1.930
V606e series SYS PROG: version V1.940

V8 series : PLCs newly supported.
・ YASKAWA MP3000 series (Ethernet UDP/IP) supported.
・ A&D AD4402(MODBUS RTU) supported.
・ A&D AD4404(MODBUS RTU) supported.
・ FUJI FRENIC-Mini(MODBUS RTU)(C2) supported.
・ FUJI FRENIC series(CPU) supported.
・ FUJI FRENIC series(CPU) PLC Ladder transfer function added.
・ FATEK AUTOMATION FACON FB series PLC Ladder transfer function added.
・ KEYENCE KZ24/300 CPU supported.
・ Lenze Servo Drive 9400 (Ethernet TCP/IP) supported.
・ YASKAWA MP3000 series EXPANSION MEMOBUS (Ethernet) supported.
・ FUJI FRENIC-Ace (MODBUS RTU) supprted.
・ YOKOGAWA UT32A/35A (MODBUS RTU) supprted.
・ YOKOGAWA UT52A/55A (MODBUS RTU) supprted.
・ YOKOGAWA UT75A (MODBUS RTU) supprted.

V8 series:HEX designation for bit device of Mitsubishi PLC device supported.

V8 series:GU-01/10/11 revised hardware supported.

Editor:Symbol import for Siemens TIA Portal supported.
Oct 2015 Ver. 5.4.40.0
V8 series SYS PROG: version V2.130
TS series SYS PROG: version V2.130
S806 series SYS PROG: version V2.130
V7 series SYS PROG: version V1.930
V6 series SYS PROG: version V1.930
V606e series SYS PROG: version V1.940

V8 series : PLCs newly supported.
・ MITSUBISHI FX5U/5UC series CPU supported.
・ MITSUBISHI FX5U/5UC series (Ethernet) supported.
・ MITSUBISHI FX3U/3GE series (Ethernet) supported.
・ MITSUBISHI L series CPU supported.
・ MITSUBISHI iQ-R series link supported.
・ MITSUBISHI iQ-R series (Built-in Ethernet) supported.
・ MITSUBISHI iQ-R series (Ethernet) supported.
・ OMRON V680S (Ethernet TCP/IP) supported.
・ KEYENCE KV-7000 (Ethernet TCP/IP) supported.
・ FUJI PXF (MODBUS RTU) supported.
・ FUJI FRENIC-VG1(MODBUS RTU) supported.
・ FUJI HFR-K1K supported.
・ YOKOGAWAμR10000/20000 (Ethernet TCP/IP) supported.
・ Azbil SDC15 supported.
・ Azbil SDC25/26 supported.
・ Azbil SDC45/46 supported.
・ Siemens S7-1200/1500 (Ethernet ISOTCP) supported.
・ RS Automation CSD5 (MODBUS RTU) supported.

V8 series : The connection device specification extended.
・ FUJI ALPHA5(MODBUS RTU) : The communication setting extended.
・ WAGO 750 series : %MW address extended.
・ BECKHOFF ADS Protocol(Ethernet) : Port extended.
・ Universal serial : The communication point of the write command WM and WC extended.

V7 series : PLCs newly supported.
・MITSUBISHI QnU series CPU supported.

Editor: Display addresses with zero supless supported.
Ladder transfer tool: Flow control supported.
Feb 2015 Ver. 5.4.39.0
V8 series SYS PROG: version V2.090
TS series SYS PROG: version V2.090
S806 series SYS PROG: version V2.090
V7 series SYS PROG: version V1.930
V6 series SYS PROG: version V1.930
V606e series SYS PROG: version V1.940

V8: System Program fixed.

Jan 2015 Ver. 5.4.38.0
V8 series SYS PROG: version V2.080
TS series SYS PROG: version V2.080
S806 series SYS PROG: version V2.080
V7 series SYS PROG: version V1.930
V6 series SYS PROG: version V1.930
V606e series SYS PROG: version V1.940

PLCs newly supported.
・ Modbus slave(ASCII) connection supported.
・ TOSHIBA VF-S15 connection supported.
・ TOSHIBA VF-MB1 connection supported.
・ TOSHIBA VF-nC3 connection supported.
・ Allen-Bradley Micro800 Controllers connection supported.
・ Allen-Bradley Micro800 Controllers(Ethernet TCP/IP) connection supported.
・ Delta DVP series Multi-link2 Ethernet connection supported.
・ Allen-Bradley Micro800 Controllers(Ethernet TCP/IP) connection supported.

Oct 2014 Ver. 5.4.37.0
V8 series SYS PROG: version V2.060
TS series SYS PROG: version V2.060
S806 series SYS PROG: version V2.060
V7 series SYS PROG: version V1.930
V6 series SYS PROG: version V1.930
V606e series SYS PROG: version V1.940

V8 series: PLCs newly supported.
・ HYUNDAI: Hi4Robot(MODBUS RTU)
・ HYUNDAI: Hi5Robot(MODBUS RTU)

V-SFT-5: Prohibiting screen upload supported with TS.
TS series: Chinese simplified supported with operation log viewer.
V8/TS series: Multi-link2 connection with V9 series supported.
V-SFT-5: Windows 8.1 supported.
Aug-1 Ver. 5.4.36.0
V8 series SYS PROG: version V2.050
TS series SYS PROG: version V2.050
S806 series SYS PROG: version V2.050
V7 series SYS PROG: version V1.930
V6 series SYS PROG: version V1.930
V606e series SYS PROG: version V1.940

V8: System Program fixed.

Yaskawa Electric Port Devices Driver Download For Windows 10
Jul-1 Ver. 5.4.35.0
V8 series SYS PROG: version V2.040
TS series SYS PROG: version V2.040
S806 series SYS PROG: version V2.040
V7 series SYS PROG: version V1.930
V6 series SYS PROG: version V1.930
V606e series SYS PROG: version V1.940

V8 series: PLCs newly supported.
・ CIMON：S series supported.
・ CIMON：S series(Ethernet) supported.
・ JTEKT：TOYOPUC-Plus supported.
・ JTEKT：TOYOPUC-Plus supported.

V-SFT-5: Buffering area setting supported copy and paste function.

Apr-4 Ver. 5.4.34.0
V8 series SYS PROG: version V2.030
TS series SYS PROG: version V2.030
S806 series SYS PROG: version V2.000
V7 series SYS PROG: version V1.930
V6 series SYS PROG: version V1.930
V606e series SYS PROG: version V1.940

V8 series: PLCs newly supported.
・ FUJI WSZ series (Ethernet) supported.
・ ULVAC G-TRAN supported.
・ MITSUBISHI Q170MSCPU-S1 supported.
・ MITSUBISHI Q170MSCPU-S1 (Ethernet) supported.

Yaskawa Electric Port Devices Driver Download For Windows 10 Free

Jan-10 Ver. 5.4.33.0
V8 series SYS PROG: version V2.000
TS series SYS PROG: version V2.000
S806 series SYS PROG: version V2.000
V7 series SYS PROG: version V1.930
V6 series SYS PROG: version V1.930
V606e series SYS PROG: version V1.940
V8 series: PLCs newly supported.
・ LS：MASTER-K series (Ethernet) supported.
・ YOKOGAWA Monitor command supported with Ethernet connection.
・ TOSHIBA nv series(Ethernet UDP/IP)
・ TOSHIBA T series/V series [T compatible](Ethernet UDP/IP) supported.
・ FUJI Micrex SX Micrex F compatible (BCD with sign) supported.
V-SFT-5: Multi language sheet supported Vietnamese and Thai.
Oct-31 Ver. 5.4.32.0
V8 series SYS PROG: version V2.000
TS series SYS PROG: version V2.000
S806 series SYS PROG: version V2.000
V7 series SYS PROG: version V1.930
V6 series SYS PROG: version V1.930
V606e series SYS PROG: version V1.940
PLC Ladder transfer function added:・ Simens　S7-300/400 MPI
Oct-13 Ver. 5.4.31.0
V8 series SYS PROG: version V1.990
TS series SYS PROG: version V1.990
S806 series SYS PROG: version V1.920
V7 series SYS PROG: version V1.930
V6 series SYS PROG: version V1.930
V606e series SYS PROG: version V1.940
V8 series: PLCs newly supported.
・ FUJI MICREX-SX SPM/SPE supported.
・ FUJI F□JF-R series supported.
・ FUJI MICREX-SX SPH3000MM supported.
・ FUJI F-MPC04E supported.
・ MITSUBISHI L series(Built-in Ethernet)SPU device supproted.
・ UNIPULSE F805A supported.
・ SUS XA-A* supported.
・ SAMSUNG SPC series supported.
・ Panasonic FP7 supported.
・ Panasonic FP7(Ethernet) supported.
TECHNOSHOT series: Trial period setting and upload prohibit setting added.
TECHNOSHOT series: Smooth Font supported.
V8 series: Alarm tracking: Acknowledge function extended.
V8 series: Switch: Repeat speed of calculation switch improved.
V8 series: Panasonic Network camera BB-HCM7xx series supported
V-SFT-5: Batch Change memory: Copy & Paste from Excel sheet supported (Mitsubishi PLC only).
V-SFT-5: Batch export/import of multi-language added.
V-SFT-5: List of the 3D bitmap area added.
V-SFT-5: Copy and Paste of [Multi-language] window added.

Jun-13 Ver. 5.4.30.0
V8 series SYS PROG: version V1.950
TS series SYS PROG: version V1.950
S806 series SYS PROG: version V1.920
V7 series SYS PROG: version V1.930
V6 series SYS PROG: version V1.930
V606e series SYS PROG: version V1.940
V8 series: PLCs newly supported.
・ Ultra Instruments UIC CPU(MODBUS ASCII) supported.
・ MITUBISHI Q series Multi-link2 Ethernet supported.

May-13 Ver. 5.4.29.0
V8 series SYS PROG: version V1.950
TS series SYS PROG: version V1.950
S806 series SYS PROG: version V1.920
V7 series SYS PROG: version V1.930
V6 series SYS PROG: version V1.930
V606e series SYS PROG: version V1.940
V-SFT-5:Include all the parts files as a standard part packaging.

Apr-13 Ver. 5.4.28.0
V8 series SYS PROG: version V1.950
TS series SYS PROG: version V1.950
S806 series SYS PROG: version V1.920
V7 series SYS PROG: version V1.930
V6 series SYS PROG: version V1.930
V606e series SYS PROG: version V1.940
V8 series: PLCs newly supported.
・ KEYENCE KZ series supported.
・ RS Automation X8 series supported.
・ RS Automation X8 series(Ethernet) supported.
・ KOGANEI IBFL-TC supported.
・ MODBUS ASCII supported.
・ YOKOGAWA FA-M3V supported.
・ YOKOGAWA FA-M3V(Ethernet) supported.
・ YOKOGAWA FA-M3V(Ethernet ASCII) supported.
・ XINJE XC series(MODBUS RTU) supported.
TECHNOSHOT supported.
PLC Ladder transfer function added:
・ Simens S7-200 PPI
V8 series: Change in Language menu on the Main Menu screen.
V8 series:Switch to Main Menu function added.
V-SFT-5: Windows8 32bit/64bit supported.
V-SFT-5: USB driver auto-installation supported.
V-SFT-5: Extended 3D parts included as standard parts files.

Jan-13 Ver. 5.4.27.0
V8 series SYS PROG: version V1.920
S806 series SYS PROG: version V1.920
V7 series SYS PROG: version V1.920
V6 series SYS PROG: version V1.930
V606e series SYS PROG: version V1.940
V8 series: PLCs newly supported.
・ Asahi Engineering Micro step driver D4730S supported.
・ OMRON E5CK-T supported.
・ Allen-Bradley CompactLogix L27ERM supported.
・ MITSUBISHI QnU series CPU Higher rank model supported.
・ Panasonic KW Series supported.
・ FUJI FRENIC-HVAC/AQUA(MODBUS RTU) supported.
・ OMRON PLC Multi Link2 compatible with V7 supported.
V8 series:Trend Graph/Trend Sampling Function extended.
V8 series:Language changeover function added to switch.
V8 series:Siemens: Filter Import Function of DB(Data Block) supported.
V8 series:Allen-Bradley: User Defined Tag Import Function supported.

Nov-12 Ver. 5.4.26.0
V8 series SYS PROG: version V1.890
S806 series SYS PROG: version V1.900
V7 series SYS PROG: version V1.920
V6 series SYS PROG: version V1.930
V606e series SYS PROG: version V1.940
S806C: System Program fixed.

Oct-12 Ver. 5.4.25.0
V8 series SYS PROG: version V1.890
V7 series SYS PROG: version V1.920
V6 series SYS PROG: version V1.930
V606e series SYS PROG: version V1.940
V8 series: PLCs newly supported.
・ Pnasonic MINAS A4 series supported.
・ CHINO LT-400 Series supported.
・ OMRON E5AK-T supported.
・ FUJI WE1MA(Ver.B)(MODBUS RTU) supported.
・ DeviceNet supported.
・ KEYENCE KV3000 Multi-link2 with V7/V6-V8 supported.
FUJI ELECTRIC :
・ Memory Conversion for when changing PLC model from MICREX-F to MICREX-SX supported.
MITSUBISHI :
・ Tag Import function supported for the variable name CSV file exported by GX works2.
V8 Series : Recipe mode Filename Sorting function supported.

Jul-12 Ver. 5.4.24.0
V8 series SYS PROG: version V1.830
V7 series SYS PROG: version V1.920
V6 series SYS PROG: version V1.930
V606e series SYS PROG: version V1.940
V8 series: PLCs newly supported.
・ Siemens TI500/505 supported.
・ Siemens TI500/505 V4 Compatible supported.
・ YAMATAKE MX series supported.
・ Allen-Bradley PLC-5(Ethernet) supported.
・ Orientalmotor High-efficiency AR Series(MODBUS RTU) supported.
・ Orientalmotor CRK Series(MODBUS RTU) supported.
・ RS OEMax NX700 Series(Ethernet) supported.
・ JTEKT TOYOPUC(Ethernet PC10Mode) supported.
・ SUNX LP-400 Supported commands extended.
V-SFT-5:Siemens: Tag Import Function supported.
V8 series:CC-Link Ver.2 supported.
Banner network camera supported.
Trend Function extended.
Mitsubishi: Ladder Monitor Function extended.
V810C: V609E compatible display function added. (128-color only).

Apr-12 Ver. 5.4.23.0
V8 series SYS PROG: version V1.790
V7 series SYS PROG: version V1.920
V6 series SYS PROG: version V1.930
V606e series SYS PROG: version V1.940
V8 series: PLCs newly supported.
・ MITSUBISHI A link+Net10 supported.
・ MITSUBISHI A series (OPCN-1) supported.
・ OMRON SYSMAC C(OPCN-1) supported.
・ FUJI ALPHA5 Smart(MODBUS RTU) supported.
・ FUJI FePSU Breaker supported.
・ FUJI FRENIC-MEGA SERVO(MODBUS RTU) supported.
・ Siemens S5(PG port) supported.
・ SHINKO TECHNOS ACD/ACR Series supported.
・ SHINKO TECHNOS ACS-13A supported.
・ SHINKO TECHNOS PC-900 supported.
・ SHINKO TECHNOS PCD-33A supported.
・ SHINKO TECHNOS WCL-13A supported.
・ SHINKO TECHNOS GC Series supported.
・ LS XGT/XGI series CPU supported.
・ LS XGT/XGK series (Ethernet) supported.
・ LS GLOFA GM7 CNET supported.
・ GE Fanuc 90 series (SNP) supported.
・ GE-Faunc RX3i(Ethernet TCP/IP) supported.
・ FUFENG APC Series Controller supported.
MITSUBISHI PLC: KeepAlive supported.
OMRON PLC: KeepAlive supported.
V8 series: Japanese Conversion Function(FEP) extended.
V8 series: YOKOGAWA Ladder Monitor: Device Searching Function extended.
V8 series: YOKOGAWA Ladder Monitor: Function Block Switching extended.
V8 series: Modbus Slave (TCP/IP): The maximum of master devices expanded to 16.
V8 series: OMRON Ladder Monitor: CJ2 supported.
V-SFT-5: Text Search and Replacement Function added.
LadderComOp: Windows Vista/7 supported.

Jan-12 Ver. 5.4.22.0
V8 series SYS PROG: version V1.750
V7 series SYS PROG: version V1.920
V6 series SYS PROG: version V1.930
V606e series SYS PROG: version V1.940
V8 series: PLCs newly supported.
・ OMRON E5CN-HT supported.
・ TOSHIBA MACHINE TC200 Device added.
・ VIGOR M series supported.
・ LS XGT/XGI series supported.
・ LS XGT/XGI series (Ethernet) supported.
・ YOKOGAWA FA-M3/FA-M3R(Ethernet UDP/IP ASCII) supported.
・ YOKOGAWA FA-M3/FA-M3R(Ethernet TCP/IP ASCII) supported.
V808C portrait orientation supported.
V-SFT-5: Filtering function for project view added.
V-SFT-5: Numerical data display parts on the panel meter change function added.

Oct-11 Ver. 5.4.21.0
V8 series SYS PROG: version V1.720
V7 series SYS PROG: version V1.910
V6 series SYS PROG: version V1.930
V606e series SYS PROG: versionV1.940
V8 series: PLCs newly supported.
・ FUJI WSZ series supported.
・ MITSUBISHI Q170MCPU (multi CPU) supported.
・ MITSUBISHI Q170MCPU (multi CPU) (Ethernet) supported.
・ Siemens S7-200(Ethernet ISOTCP) supported.
V8 series:
・ Macro command search function added
・ Panel meter functions available with 128 colors , 256 colors and monochrome type
・ E-mail port No. change function added
・ RGB (input) display compatible with V7
・ V8 series: Windows font size in points available up to 999

Jul-11 Ver. 5.4.20.0
V8 series SYS PROG: version V1.680
V7 series SYS PROG: version V1.910
V6 series SYS PROG: version V1.930
V606e series SYS PROG: version V1.940
V7 series: System Program fixed
・Please refer to Improvement Information for further information.

Jun-11 Ver. 5.4.19.0
V8 series SYS PROG: version V1.680
V7 series SYS PROG: version V1.900
V6 series SYS PROG: version V1.930
V606e series SYS PROG: version V1.940
V-SFT-5: Failure fixed

Apr-11 Ver. 5.4.18.0
V8 series SYS PROG: version V1.670
V7 series SYS PROG: version V1.890
V6 series SYS PROG: version V1.930
V606e series SYS PROG: version V1.940
V8 series: PLCs newly supported.
・ YAMATAKE DMC50(COM) C Device supported.
・ DELTA TAU DATA SYSTEMS PMAC P_INT Device supported.
・ DELTA TAU DATA SYSTEMS PMAC(Ethernet TCP/IP) P_INT Device supported.
・ YOKOGAWA FA-M3 SW/SL Extended Command supported.
・ YOKOGAWA FA-M3R SW/SL Extended Command supported.
・ YOKOGAWA FA-M3/FA-M3R(Ethernet UDP/IP) SW/SL/F Extended Command supported.
・ YOKOGAWA FA-M3/FA-M3R(Ethernet TCP/IP) SW/SL/F Extended Command supported.
・ YOKOGAWA FA-M3/FA-M3R(Ethernet UDP/IP) System-log read command supported.
・ YOKOGAWA FA-M3/FA-M3R(Ethernet TCP/IP) System-log read command supported.
・ YOKOGAWA FA-M3/FA-M3R the defult setting of Communication parameter changed.
・ Universal Serial from PLC1 to PLC8 supported.
・ Jetter JetControl Series2/3(Ethernet UDP/IP) supported.
・ TOHO TTM-000 supported.
・ Allen-Bradley NET-ENI(SLC500 Ethernet TCP/IP) supported.
・ Allen-Bradley NET-ENI(Micrologix Ethernet TCP/IP) supported.
・ Fuji Electric FALDIC-W series supported.
・ GE Fanuc 90 Series(SNP-X) Multi Link2 compatible with V7 supported.
・ SHARP JW300 series supported.
・ SHARP JW series(Ethernet) supported.
・ SHARP JW311/213/321/322(Ethernet) supported.
・ SHARP JW331/332/341/342/352/362(Ethernet) supported.
・ Fuji Electric MicrexSX Redundancy supported.
・ KOYO SR-T(K Protocol) supported.
・ KOYO SU/SG supported.
・ GE Fanuc 90 series supported.
V7 series: PLCs newly supported.
・ Fuji Electric MicrexSX T-Link Redundancy supported.
PLC Ladder transfer function added:
・ MITSUBISHI QnA LadderMonitor supported
V8 series:
・ Range after scaling numbers in Number Display reflected to Minimum and Maximum numbers.
・ The function of printing Data Sheet extended.
V-SFT-5:
・ The dialogue setting of MES reformed.
・ The order INC of the Entry Target possible to be changed by Batch Change.
・ Windows Vista/Windows 7 64bit supported.
・ The addition of Attribute Specification Memory in Detail Tab of Number Display.
・ The brightness adjusting Macro/ BRIGHT/ for V808CH supported.
・ Tags of importing of Siemes S7-200 Format supported.
For
Feb-11 Ver. 5.4.17.0
V8 series SYS PROG: version V1.650
V7 series SYS PROG: version V1.880
V6 series SYS PROG: version V1.930
V606e series SYS PROG: version V1.940
V8 series: PLCs newly supported.
・ YAMATAKE NX(CPL)
・ YAMATAKE NX(Modbus RTU)
・ YAMATAKE NX(Modbus TCP/IP)
・ Agilent 4263 series
・ Turck BL Series Distributed I/O (MODBUS TCP/IP)
・ RKC FB100/FB400/FB900 (MODBUS RTU)
・ MOELLER PS4
・ FUJI FRENIC5000G11S/P11S
・ FUJI PH series
・ Allen-Bradley ControlLogix(Ethernet) CPU slot No. supported.
V8 series: Grobal Overlap supported.
V8 series: Additional features for a panel meter supported.
V8 series: Mute setting for Overlap buzzer supported.
V8 series: UPDATE function added to MES macro command.
V8 series: Backup making feature for Recipe function supported.
V8 series: Archive error log for wiring to external media supported.
V-SFT-5:
・ Marging feature for the message supported.
・ The limit of the number of the letters in a switch/lamp changed.

Nov-10 Ver.5.4.16.0
V8 series SYS PROG: version V1.610
V7 series SYS PROG: version V1.870
V6 series SYS PROG: version V1.930
V606e series SYS PROG: version V1.940
V-SFT-5: Failure fixed

Oct-10 Ver.5.4.15.0
V8 series SYS PROG: version V1.610
V7 series SYS PROG: version V1.870
V6 series SYS PROG: version V1.930
V606e series SYS PROG: version V1.940
V8 series: PLCs newly supported.
・ SANMEI CutyAxis
・ OMRON SYSMAC CS1/CJ1 DNA
・ OMRON SYSMAC CS1/CJ1 DNA(Ethernet)
・ Siemens S7-1200(Ethernet ISOTCP)
・ CIMON BP series
・ CIMON CP series
・ CHINO LT230(MODBUS RTU)
・ CHINO LT300(MODBUS RTU)
・ CHINO LT830(MODBUS RTU)
・ CHINO DB1000B(MODBUS RTU)
・ CHINO KR2000(MODBUS RTU)
・ Bosch Rexroth IndraDrive
V7 series: PLCs newly supported.
・ Siemens S7-1200(Ethernet ISOTCP)
・ MITUBISHI QnU built-in Ethernet
V8 series: Continuous printing of data sheet printing supported.
V8 series: Float numbers supported for trend graph / trend sampling and data sampling.
V8 series: Add and delete for numbers supported for numeral entry.
V8 series: Offset memory supported for numeral data display and character display.
V-SFT-5:
・ Remapping of the destination screen number supported for the switch function [screen].
・ End memory designation and memory count designation supported for Memory batch change.

Jul-10 Ver.5.4.14.0
V8 series SYS PROG: version V1.570
V7 series SYS PROG: version V1.860
V6 series SYS PROG: version V1.930
V8 series: PLCs newly supported.
・ WAGO 750series(MODBUS RTU)
・ WAGO 750series(MODBUS Ethernet)
・ UNITORONICS Vision Series(ASCII Ethernet TCP/IP)
・ HITACHI HIDIC-S10α
・ MITSUBISHI QnU series(Built-in Ethernet)
・ MITSUBISHI L series link
・ MITSUBISHI L series (Built-in Ethernet)
V8 series: Remote Desktop: Auto reduction function enhanced.
V8 series: Operation Log: Filtered display of the log viewer added.
V8 series: Operation Log: Operation log can be selected with each switch.
V8 series: Yokogawa: Comment can be uploaded when using ladder monitor feature.
V8 series: Mitsubishi: Compatible memory device extended with Q series.
V8 series: Macro command: IF(TST) macro command added.
V8 series: Macro command: GRE_TO_CLND command added (converting date).
V8 series: Graphs: Float data supported.
V8 series: Total number to be registered is extended with Overlap Library/Screen Library/Page Block

Jun-10 Ver.5.4.13.0
V8 series SYS PROG: version V1.560
V7 series SYS PROG: version V1.850
V6 series SYS PROG: version V1.930
V8 series: System Program fixed
・ - The system program will be upgraded to Ver.1.560 due to the change of the flash memory which
is used in V8 series.

Apr-10 Ver.5.4.12.0
V8 series SYS PROG: version V1.530
V7 series SYS PROG: version V1.850
V6 series SYS PROG: version V1.930
V7 series: System Program fixed.
・ Please refer to Improvement Information for further information.
Download
Apr-10 Ver.5.4.11.0
V8 series SYS PROG: version V1.530
V7 series SYS PROG: version V1.840
V6 series SYS PROG: version V1.930
V8 series PLCs newly supported.
・ FUJI FVR-E11S
・ M-SYSTEM R1M series(MODBUS RTU)
・ OMRON KM20-B40
・ OMRON KM100
V8 series: Panasonic network camera supported.
V8 series: Japanese Conversion Function - supported models extended.
V8 series:OMRON SYSMAC CS1/CJ1 USB/Ethernet ladder transfer function
V8 series: MODBUS RTU EXP Free Format
・ maximum settable table number extended.
V8 series: Return switch - returning to the screen changed externally supported.
V8 series: PLC ladder monitor - supported function extended.
V8 series: PLC ladder monitor
・ OMRON CJ1 supported.
V8 series: Multi-link2 compatibility with V7 supported.
V-SFT-5: Windows 7 supported.
V-SFT-5: Font size became changeable in Macro edit screen.
V-SFT-5: Comments in multiple lines supported in Macro edit screen
V-SFT-5: File name added to the title in Macro edit screen
V-SFT-5: Selection Environment Setting - Option to apply to all screens supported.
V-SFT-5: Option for auto-update of System Program (SYS PRG) supported.
Frame Auto Fit - right-click menu added to support the batch change of multiple parts.
V-SFT-5: Tag - usage list function supported.

Feb-10 Ver.5.4.10.0
V8 series SYS PROG: version 1.520
V7 series SYS PROG: version 1.830
V6 series SYS PROG: version 1.930
V8 series PLCs newly supported.
・ GLOFA CNET
・ GLOFA GM series CPU
・ Allen-Bradley PLC-5
・ MITSUBISHI MR-J2S-*A
・ SHARP DS-30D
・ SHARP DS-32D
・ YASKAWA MP2000
・ YASKAWA MP2000 series (Ethernet)
Trend Graph: Background drawing feature supported.
V-SFT-5: Import/export feature in Tag Database supported.
V-SFT-5: Memory/number remapping when moving screens supported.
V-SFT-5: Batch change of Screen Library supported.
V-SFT-5: Extended cross-reference feature supported.
V-SFT-5: export/import of Network Table supported

Nov-09 Ver.5.4.9.0
V8 series SYS PROG: version 1.500
V7 series SYS PROG: version 1.820
V6 series SYS PROG: version 1.930
V8 series PLCs newly supported.
・ Automationdirect DirectLOGIC(Ethernet UDP/IP)
・ IDEC MICRO Smart pentra
・ TOSHIBA MACHINE VELCONIC series
・ MODBUS RTU EXP Format

Oct-09 Ver.5.4.8.0
V8 series SYS PROG: version 1.460
V7 series SYS PROG: version 1.800
V6 series SYS PROG: version 1.910
V8 series: MITSUBISHI ladder monitor extensions.
V8 series: YOKOGAWA USB/Ethernet ladder transfer function supported.
V8 series: Symbol edit function supported.
V8 series PLCs newly supported.
・ CHINO DP1000G
・ IAI RCP2/ERC
・ IAI RCS/E-CON
・ FUJI ELECTRIC MicrexSX(SPH) Batch activation/stop supported.
・ FUJI ELECTRIC FRENIC-MEGA(MODBUS RTU) Broadcast writing supported.
・ FUJI ELECTRIC FRENIC-5000VG7S(MODBUS RTU) Broadcast writing supported.
・ FUJI ELECTRIC FRENIC-Multi(MODBUS RTU) Broadcast writing supported.
・ FUJI ELECTRIC FRENIC-Eco(MODBUS RTU) Broadcast writing supported.
・ FUJI ELECTRIC PXG(MODBUS RTU) Port number is extended up to no. 247.
・ FUJI ELECTRIC PXH(MODBUS RTU) Port number is extended up to no. 247.
・ FUJI ELECTRIC PHR(MODBUS RTU) Port number is extended up to no. 247.
V-SFT-5: Macro symbol can be appeared on switch.
V8 series: 2-port supported with touchswitch emulation.
V8 series: Logout function supported in macro.
V8 series: Network camera AXIS M1011 supported.
V8 series: V7 compatible display in PAL supported.

Aug-09 Ver.5.4.7.0
V8 series SYS PROG: version 1.460
V7 series SYS PROG: version 1.800
V6 series SYS PROG: version 1.910
V8 series PLCs newly supported.
・ MODICON ModbusRTU
・ MITUBISHI MR-J3-*T
・ SHIMADEN Shimaden Standard Protocol
・ MODBUS RTU 1:n Multi-link2(Ethernet) supported.
・ Telemecanique TSX Micro
・ SHINKO TECHNOS JCx-300 series
・ LS GLOFA GM series (Ethernet UDP/IP)
V8 series: RKC Setting range of the station number was extended

Jul-09 Ver.5.4.6.0
New model
・ S808 series is added.
V8/V7/V6 series PLCs newly supported.
・ MITUBISHI FX3 series (A Protocol) supported.
V8 series PLCs newly supported.
・ MITUBISHI A series (CC-Link) supported.
・ MITUBISHI QnA series (CC-Link) supported.
・ GE Fanuc 90 series(Ethernet TCP/IP) supported.
・ DELTA DVP series supported.
V8 series: Allen-Bradley: BOOL is supported forControl Logix/Compact Logix
V8 series: Modbus RTU: Data length of 7-bit is added.
V8 series:Continuous buzzer for switch supported.
V-SFT-5: Macro tool bar added.
V-SFT-5: Batch setting of the Page block edit is supported.

May-09 Ver.5.4.4.0
V8series PLCs newly supported.
・ MITSUBISHI FX3U-ENET supported.
・ UNIPULSE F720A supported.
・ UNIPULSE F800 supported.
・ EMERSON EC10/20/20H (MODBUS RTU) supported.

Driver Downloads For Windows 7

Apr-09 Ver.5.4.3.0
V8 sereis: AB: Memory range extended from 65:255 to 255:255
Fuji: SX Instrumentation Package function supported.
V808C: V609E compatible display function added. (128-color only)
V8series PLCs newly supported.
・ Hitachi Industrial Equipment System SJ300series supported.
・ Hitachi Industrial Equipment System SJ700series supported.
・ UNIPULSE F340A supported.
・ UNIPULSE F371 supported.
・ TOSHIBA EXseries supported.
・ Banner Vision Ethernet I/P Protcol supported.
・ MITSUBISHI QnH(Q)series (Ethernet ASCII) supported.
・ MITSUBISHI QnH(Q)series (Multhi CPU) (Ethernet ASCII) supported.
・ Siemens S7-200PPI: 187.5kbps supported.
V7/V6series PLCs newly supported.
・ KEYENCE KV-3000/5000 supported.

Driver Download Nvidia

Feb-09 Ver.5.4.1.0
V8 sereis: Remote Desktop function supported.
V8series PLCs newly supported.
・ FL-Net supported.